Step 1
HOW TO FIND AND PREPARE CARDS
Choose the cards you want to print. We can print all sizes of playing cards.
Files must be provided as individual files for each card . The format must be PNG (for games with rounded corner cards) or JPG files. For unreleased cards we recommend leaving 3mm of bleed on each side to have a perfect cut. There are 9 card slots on each print sheet. Print your unreleased games or proxies for your favorite TCGs to test out your decks.
NB it is very important that the cards have a high resolution, make sure you check this aspect before sending your cards to print to avoid unpleasant surprises after printing.
Step 2
how to make the order of the cards and the cut
Place your order on the site.
You can find the printing service in the products section, under the heading "printing playing cards and proxies" .
Depending on the quantity of sheets you print, the price per single sheet may be lower.
The cutting service is separate and must be added to the cart as a product , you will find it in the same section as the print. The cut, at the moment, is sharp edged for each paper, including those with rounded corners, but we can provide you with support to purchase the tool that is used to round the corners at a low price.
The cutting of the cards may not be 100% precise due to the high resolution printing technology used which does not allow for perfect centering to the tenth of a millimeter.
Step 3
How to send files
Files must be sent to info@dungeonswood.com in a single folder (if printing is single-sided) or in 2 folders (in the case of front and back).
Given the size we recommend using wetransfert or drive to send the folders.
The email must include the order number and the format of the cards to be printed .
With three simple steps you can order your cards!!!
